HANDHELD REPLACEMENT BATTERY FOR THE GARMIN ALPHA 100
This lithium-ion replacement battery for the Garmin Alpha 100 and Alpha 200i handhelds is tiny and compact, and it’s simple to install in your Alpha 100. Because it’s so little, you may want to have additional fully charged batteries with you in the field to swap out if you get a low battery alert. It just takes approximately 30 seconds to exchange.
Depending on how often you use the backlight, these batteries may last up to 20 hours when completely charged. It takes roughly 4 1/2 hours to charge a totally exhausted battery.
In order to replace the battery in your Alpha 100 handheld, follow these steps:
The screen should be pointing down on the handheld. Lift the battery cover lock and spin it 90 degrees counter-clockwise. Remove the battery cover from the battery. Lift the battery from the top of the handheld and swivel it towards the bottom.
Install the new battery into the Alpha handheld with the letters facing up and the gold contact points aligned with the contact pins. Replace the battery cover and secure it in place by rotating the key 90 degrees clockwise.
Replacement rechargeable lithium-ion battery for the Garmin Alpha 200i / 100 handhelds.
Specifications:
Rechargeable Li-ion
Voltage: 3.7VDC
Amperage: 2000mAh
Watt Hours: 7.4
How long does a Garmin Alpha Battery Last?
| Battery type | Rechargeable, replaceable lithium-ion |
|---|---|
| Battery life | From 20 to 40 hr. Battery life is determined by the handheld device in use. |
| Operating temperature range | From -20° to 60°C (from -4° to 140°F) |
| Charging temperature range | From 0° to 40°C (from 32° to 104°F ) |
How do you take the battery out of a Garmin Alpha 100?
- Remove the six screws from the outer edges of the back plate. NOTE: You should leave the two inner screws in place.
- Pry off the back plate.
- Disconnect the battery connector and power connector.
- Remove the screws that secure the battery cover.
- Remove the battery cover and the battery.
How do I charge my Garmin Alpha 100?
- Snap the charging clip onto the device .
- Plug the small end of the power cable into the mini-USB port on the charging clip cable.
- Plug the power cable into a power source.
- After the status LED turns solid green, remove the charging clip from the collar.
How long does the Alpha 100 battery last?
What is the procedure for replacing the battery in my Garmin dog collar?
Remove the battery plate by unscrewing the two screws and removing the battery plate. To detach the battery connection from the device, grab the battery connector wires near to the connector and pull the connector parallel to the circuit board. Remove the battery from the device. The battery is securely fastened.
How do I update my Garmin Alpha 100 handheld?
- Connect your Alpha 100 to your computer with a mini USB.
- Launch Garmin Express.
- Select your Alpha.
- Garmin Express will then display the available updates.
Be the first to review “GARMIN ALPHA 100 REPLACEMENT BATTERY”
Related products
GARMIN ALPHA 100 TRACKING & TRAINING
GARMIN ALPHA 100 MINI TT15
GARMIN ALPHA 100 TRACKING & TRAINING
GARMIN ALPHA 100 TRACKING & TRAINING
GARMIN ALPHA 100 MINI TT15
GARMIN ALPHA 100 MINI TT15
GARMIN ALPHA 100 MINI TT15
GARMIN ALPHA 100 TRACKING & TRAINING
Reviews
There are no reviews yet.